Our Blog

DTM R08 TEMPERATURE SCANNER TO HMI COMMUNICATION

Download DTM Soft from DELTA download center. Open DTM Soft, click New project, give Project name and save. A new window opens for the DTM Soft, click on RS 485, give com port. Click Add unit on the left side, assign modbus station number and model name, then click next. After giving next, a Parameter […]

Post Types 0 Comment

CONFIGURING DELTA ANALOG MODULE (DVP-O6XA-S) WITH DELTA PLC (DVP-12SA2)

CONFIGURING DELTA ANALOG MODULE (DVP-O6XA-S) WITH DELTA PLC (DVP-12SA2)  1. WIRING DIAGRAM NOTE: External 24vdc needs to connect with module Check and confirm the module number and whether it will communicate with PLC in manual PLC Programming: Create a new project. Select SA2 model PLC Select the Auxiliary Setup for Extension Select the place of the […]

Post Types 0 Comment

RS-485 Device Communication with Micrologix 1400 PLC using RSLogix 500 Software

Connect the 1763-NC01 extension card to the 8 pin RS-485 port of the PLC CPU unit.  In 1763-NC01 extension card connect A→A(A+) to the destination module or slave controller that’s RS-485 enabled. Likewise B→B(B+). Configure the slave device with Slave ID, Data Bits, Baud Rate, Stop Bits and Parity. Better have those with defaults unless and […]

Post Types 0 Comment

The Blog

Welcome to Math Technologies Blog Our Aim is “To connect the Industry – Industry – Engineer” Why? We are a company who is doing/providing Automation solution to the industry. That means we as a company doing projects for the industry to

Post Types 0 Comment